|
Microsilica is used as A highly active mineral additive to concrete and cement and is intended for preparation concretes of high marks by strength and waterproofnesses as well as high corrosion stability. The concrete with microsilica (at batching within 20% from cement weight) are used in all concrete and reinforced concrete constructions of the housing-civil and industrial building, including the systems of the portable water-supply.
in detail >> |
|
Polypropylene fibre is used as dispersed-reinforced agent in all types cement mortars, when it is necessary to prevent formation of strain cracks, appearing due to mechanical effect or shrinkages (pour floor, pouring of joints, formwork potting), as well as in case of need to improve concrete product strength.
in detail >> |
|
It is an industrial mix of thiocyanate and sodium thiosulfate with sodium polynaphthalene methylene sulfonate. It contains the admixtures of sodium sulfonate and resin. According to classification GOST 24211 the agent relates to: plasticizing-water reducing fluidifier, regulated the curing kinetics.
in detail >> |
|
FORT UP-1, as other complex agents for all concrete and reinforced concrete types FORT UP-1 as well as other complex agents of series "FORT UP" represents a dosing mix of powdery and fine-crystalline components. The agent corresponds to the fourth danger class (low-hazard agents). It dissolves well in warm water (up to +40°Ñ). In case of need it can be added in power-like state into cement-sand mix dissolved in warm water (+30 - +40°Ñ)
in detail >> |
|
The complex concrete agent FORT UP-2 is used in the production of large range of concrete and reinforced concrete products. Due to high efficiency of the agent as a setting accelerator, it is successfully applied in cast-in-situ construction and production of moulding concrete products. The application of the agent allows to produce concrete articles according by non-steam-curing technology at temperature of the production shops more than 10°Ñ. A plasticizer presence in the agent helps to serve a lot the cement consumption (up to 15%) without strength reduction in a products.
in detail >> |
|
The complex concrete agent FORT UP-2PB is used in the production of non-autoclave foam concrete products to accelerate the cement hydration. The application of the agent provides the formwork strength of a product in 10-12 hours. Besides the increasing of curing kinetics the agent reduces a lot the foam concrete shrinkage. Due to this fact the shrinkage cracks are not created and the handling strength of a product is not reduced.
in detail >> |
|
The complex concrete agent FORT UP-2Ì is used in the production of large range of concrete and reinforced concrete products. Due to high efficiency of the agent as a setting accelerator, it is successfully applied in cast-in-situ construction and production of moulding concrete products. The application of the agent allows to produce concrete products according to non-steam-curing technology at temperature of the production shops more than 10°Ñ. A plasticizer in the agent helps to serve a lot the cement consumption (up to 20%) without strength reduction in products.
in detail >> |
|
FORT UP-3 is a multicomponent homogenious complex that is used in all industrial cold-weather concreting works. Due to plasticizing agent, UP-3 improves considerably the plasticity of the concrete mix that permits to convey concrete mixes and mortars for the distance of 50 km and more and to form up for further setting. It provides the standard concrete strength increase during operation in winter periods and at the production of the precast concrete and reinforced concrete constructions and building mortars of different purpose according to GOST 24211-03.
in detail >> |
|
The complex concrete agent FORT UP-4 is used as multipurpose modifier in the production of large range of concrete and reinforced concrete products including those that are made using the thermo moisture curing. The agent doesn’t contain components that cause the corrosion of the reinforcement that allows to use it in stressed reinforcement articles. The agent is combined with other one-component air-entraining, plasticizing and accelerating agents (the application with nitrates, and other agents should be agreed with manufacturer). It allows to rise a lot its efficiency effect using in the focused purposes, with simultaneous reduction of costs (production of high-strength concrete, concretes with augmented requirements of frost resistance, sulphateresistance, water impermeability).
in detail >> |
|
The complex concrete agent FORT UP-5 is used in large range of concrete and reinforced concrete products according to method of cold-weather concreting at temperature from 0 to -15°Ñ. The agent doesn’t include components that provoke the corrosion of reinforcement that allows to use it in reinforced constructions and products with prestressed reinforcement. Designing the agent FORT UP-5 the productivity of each component is taken into account that function as a system, as separately (mutual improvement of plasticizing effect and softening of setting, total strength increasing and concrete freeze-thaw durability and other).
in detail >> |
|
The complex concrete agent FORT UP-4Ì is used as a multipurpose modifier in the production of large range of concrete and reinforced concrete products including those that are made using the steam curing. The agent doesn't contain components provoke the corrosion of the reinforcement that allows to use it in prestressed reinforcement products. The agent is combined with other one-component air-entraining, plasticizing and accelerating agents (the application with nitrates, and other agents should be agreed with manufacturer). It allows to rise a lot its efficiency using in the focused purposes, with simultaneous reduction of costs (production of high-strength concrete, concretes with augmented requirements by frost resistance, sulphateresistance, water impermeability).
in detail >> |
|
At steam curing the agent FortRise™ "Petrolafs" allows: to apply low heating technology that provides the receiving of transfer concrete curing at the age of 12 hours at temperature lower than 40°Ñ; to apply free-steam curing and free-heating technology that provides the receiving of transfer concrete curing at the age of 12 hours at temperature lower than 30°Ñ.
in detail >> |
|
The application of complex agent FortRise™ "Express Plast", will allow enterprise for your company to use this agent for large range of tasks without buying other agents. The agent has no restrictions in application and can be used in all types of concrete and reinforced concrete products, as well as in ready-mixed concrete. By its effect on concrete mix "Express Plast" relates to heavy plasticizing setting accelerators according the GOST 24211-03.
in detail >> |
|
The solution for mould lubrication on base of emulsole is intended to lubricate metal and plastic moulds in the production of foam concrete blocks, paving tile, and reinforced concrete articles.
in detail >> |
